Self-supporting outdoor aluminum solar shading with 97mm slats (P97)

The sunshades for sale on Proteggendo are equipped with self-supporting side guides in extruded aluminum 85x45mm painted in RAL colors. Clutched rocker arm mechanisms, in untreated zamak with the function of positioning the slats at 37 ° in the descent phase, automatic closing of the same when the sunshade is lowered, and horizontal positioning in the ascent phase.

Up movement. and descent by means of a carbon steel chain with articulated elements. Automatic safety release system in case of obstacles during the descent. Galvanized die-cast pivots connected to each other by constant pitch stainless steel hinges. The sunshade has an anti-lifting system of the slats from the outside both in closed and open position.

U-shaped box in galvanized steel in which the electric motor and transmission shafts are housed. Control with single-phase asynchronous electric motor 230V-50HZ value IP54 with thermal protection, electromagnetic brake, automatic limit switch unit with upper and lower stop, equipped with 0.50 ml of 4x0.75 four-pole cable and wired female connector (excluding push-button panel). Including KIT FOR ASSEMBLING guides, screws with plugs and compensator shims for out-of-ground Mg aluminum pre-painted in standard colors, thick. 0.75 mm, width 97 mm with longitudinal stiffening ribs on both sides and anti-noise and darkening gasket inserted on the inner edge; the slats are equipped at both ends with stainless steel clips snap-connected to the pivots of the mechanisms inside the guides. Self-supporting side guides in extruded aluminum 85x45 mm painted in standard ral colors or natural anodized. Clutched rocker arm mechanisms in zamak with the function of positioning the slats in the descent phase and automatic closing of the same when the sunshade is lowered. Forced movement of the slats up and down by means of a chain with articulated elements. Automatic safety release system of the slats in case of obstacles during the descent. The die-cast slat holder pivots are connected to each other by means of a constant pitch stainless steel chain. When the slats are closed, the sunshade is automatically locked from the outside by means of the integrated anti-lifting system. Control by single-phase asynchronous electric motor 230V-50HZ value IP54 with thermal protection, electromagnetic brake, automatic limit switch unit with upper and lower stop, equipped with 0.50 ml of 4x0.75 four-pole cable and wired female connector (excluding push-button panel).

All parts visible in Image 3 :

1 Head and box support

2 Side guides

3 Mechanics for orientation and slat holder supports

4 Slats

5 Box with operating mechanisms

MOTOR CONTROL WINCH CONTROL strong >

Chain sunscreen for outdoor with pre-painted Mg Aluminum slats in standard colors, thickness. 0.75 mm, width 97 mm with longitudinal stiffening ribs on both sides and anti-noise and darkening gasket inserted on the inner edge; the slats are equipped at both ends with stainless steel clips snap-connected to the pivots of the mechanisms inside the guides. Self-supporting side guides in extruded aluminum 85x45 mm painted in standard ral colors or natural anodized. Clutched rocker arm mechanisms in zamak with the function of positioning the slats in the descent phase and automatic closing of the same when the sunshade is lowered. Forced movement of the slats up and down by means of a chain with articulated elements. Automatic safety release system of the slats in case of obstacles during the descent. The die-cast slat holder pivots are connected to each other by means of a constant pitch stainless steel chain. When the slats are closed, the sunblind is automatically locked from the outside by means of the integrated anti-lifting system. Winch control complete with limit switch unit, operating rod complete with 45 ° return and rod stop.