Armored roller shutter in steel insulated with polyurethane ^*Required step

The peculiarity of this shutter is the insulation which can be either standard or high density (the difference consists in the different weight of the polyurethane inserted inside the slats per cubic meter).

The closed cell structure and the high cross-linking density give the shutter characteristics such as good heat stability, considerable resistance to compression, as well as excellent insulating properties.

You can choose the size of the steel slats (available in 55mm Standard and 45mm Mini for less bulky boxes), then the density of the polyurethane insulation foam and the color of the same and then insert it within the totally free estimate.

It is possible to have the steel shutter with the protected cap useful in case you want to install the shutter using the old galvanized iron guides without replacing them.

The roller shutter is made up of self-hooking steel slats, equipped with plastic side caps to prevent them from sliding sideways.

- Steel sheet thickness: 0.33 mm

- Insulation in polyurethane foam density 55 kg / mc

- Weight: about 10 kg / m2

NB </ p>

- The protected cap is only suitable if the existing guide has an internal width of at least 16.5 mm

- The maneuver kit does not include the guides; we recommend looking at our section on guides for shutters (Click here)

- The maneuver kit does not include the buttons; we recommend looking at our section on engine accessories (Click here)

- The roller shutter will be shipped complete with the roller attachment system.

- The high-density steel roller shutter is available upon request .

< strong> ATTENTION

- The roller shutter will be supplied with the holes for the stop caps. If you do not want the holes, indicate the request in the Final Notes of the order before confirming the same (you can also insert them in the estimate which you can then transform into an order).

- The roller shutter will be supplied with slotted slats .

- In case of motorization, Sicurbloc can be used as an anti-lifting system.

- The minimum billable is 1.5 square meters.

For a correct purchase, we recommend that you follow our guide in order to avoid mistaking the measurements and receiving a product that is not suitable for your needs.

Buying guide for rolling shutters